1～12 item / All 12 items
A spinner handle that can be used at any angle with a bent drive.
Insert angle: 9.5mm. The square drive is a spinner handle that bends 90 degrees to the left and right around a pin located at the head of the handle, allowing it to be used at any angle. When quickly tightening, such as for temporary fastening, the handle should be used upright, and when the handle is turned sideways, it can be used for final tightening.
When using the spinner handle for quick tightening, hold the handle upright, and when the handle is turned sideways, it allows for final tightening.
Insertion angle: 12.7mm. A spinner handle that bends 90° to the left and right around a pin located at the head of the handle, allowing it to be used at any angle. When quickly tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening.
A spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insert angle: 9.5mm A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When quickly tightening during preliminary tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A long spinner handle that can be raised during early return and laid horizontally for final tightening.
Insert angle: 9.5mm The square drive bends 90° to the left and right around a pin located at the head of the handle, allowing for angle adjustments of 15 degrees each, with a long overall length for the long spinner handle. When quickly tightening during preliminary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insert angle: 12.7mm A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When quickly tightening during preliminary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
When using for quick tightening such as temporary fastening, hold the handle upright, and when the handle is horizontal, it can be used for final tightening with a spinner handle.
Insert angle: 19.0mm. A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing it to be used at any angle. When quickly tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening.
A short spinner handle that can be raised during early winding and laid horizontally for final tightening.
Insert angle: 6.35mm A short spinner handle with a square drive that bends 90° to the left and right around a pin located at the head of the handle, allowing for angle adjustments in 15-degree increments. When quickly tightening during temporary fastening, use the handle upright; when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insertion angle: 6.35mm A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When performing quick tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A long spinner handle that can be raised during early return and laid horizontally for final tightening.
Insertion angle: 6.35mm A long spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright; when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A short spinner handle that can be raised during early winding and laid horizontally for final tightening.
Insert angle: 9.5mm A short spinner handle with a square drive that bends 90° to the left and right around a pin at the head of the handle, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A short spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insertion angle: 12.7mm A short spinner handle with a square drive that bends 90° to the left and right around a pin at the head of the handle, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A long spinner handle that can be raised during early winding and laid sideways for final tightening.
Insert angle: 12.7mm The square drive bends 90° to the left and right around a pin located at the head of the handle, allowing for angle adjustments of 15 degrees each, and features a long spinner handle. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
